Table of Contents
Advertisement
Loose labels on cassette tapes can become lodged in the
mechanism. Remove any loose label material before inserting
a cassette.
If a tape is loose inside the cassette, tighten it before playing
by putting your finger or a pencil into one of the holes and
turning the hub until the tape is tight.
Using a Ford Cassette Cleaning Cartridge to clean the tape
player head after 10-12 hours of play will help maintain the
best playback sound and proper tape operation.
Clock Operation
How to View the Clock Mode
Press the "CL" button to alternate the frequency/tape/CD (if
equipped) and time in the display. In the clock mode, pressing
any radio/tape/CD (if equipped) function will automatically
display the radio frequency/tape/CD (if equipped) for
approximately ten seconds before changing back to the clock
mode.
How to Set the Clock
Turn the ignition on (clock can be set when radio is on or
1.
off).
Press and hold in the "CLK" button, press the "SEEK"
2.
button left ( b ) to advance the hours and right ( a ) to
advance the minutes.
NOTE: The clock displays 12-hour time with no A.M./P.M.
indications.
Electronic Sound Systems
217
Advertisement
Table of Contents
