Ford Villager Owner's Manual page 263

Removing the optional wheel cap
Fit the hex-shaped end of the lug wrench over the wheel lug
4.
nuts and loosen them one-half turn (counterclockwise). Do
not remove the wheel lug nuts until you raise the tire off the
ground.
If your vehicle has the optional locking lug nuts, you must
use the lug nut removal tool provided with your vehicle's
tool kit.
Anti-theft lug nut
Fit the jack under the proper jacking point indicated by the
5.
notch in the bottom of the door frame panel.
Roadside Emergencies
267