Ford Villager Owner's Manual page 327

Automatic transaxle fluid dipstick
Adding Automatic Transaxle Fluid
The fluid type is stamped on the dipstick. Before adding any
fluid, be sure that the correct type will be used.
Add fluid in 1/2 pint (0.25 liter) increments through the filler
tube to bring the level to the correct area on the dipstick. If an
overfill occurs, excess fluid should be removed by a qualified
technician.
NOTE: Always dispose of used automotive fluids in a
responsible manner. Follow your community's
standards for disposing of these types of fluids. Call
your local recycling center to find out about recycling
automotive fluids.
NOTE: Always use Motorcraft MERCON or equivalent
MERCON automatic transaxle fluid when you refill
your automatic transaxle fluid.
Brake Fluid
Your vehicle is equipped with a brake fluid level indicator in
the master cylinder which lights the BRAKE warning light on
the instrument panel when the brake fluid level is low.
Servicing Your Villager
333