Table of Contents
Advertisement
Selecting the right viscosity for your climate
Synthetic engine oils which are CERTIFIED and of the preferred
viscosity may be used in your engine. The engine oil and oil
filter must still be changed according to the maintenance
schedule.
Checking and Adding Engine Oil
Since the proper amount of engine oil is important for safe
engine operation, check the oil using the dipstick each time you
put fuel in your vehicle. Remember the engine must be off, the
oil must be warm and the vehicle must be parked on level
ground.
Checking the engine oil level:
Turn the engine off after it has warmed up and allow a few
1.
minutes for the engine oil to drain back into the oil pan.
Set the parking brake fully and make sure that the gearshift
2.
is securely latched in P (Park).
Open the hood. Protect yourself from engine heat.
3.
Locate the engine oil dipstick (highlighted in yellow) and
4.
carefully pull it out of the engine.
Servicing Your Villager
311
Advertisement
Table of Contents
