Table of Contents
Advertisement
How to eject the tape
To stop the tape and eject the cassette, press the "EJ" button.
The radio will resume playing if the radio power is on. The
tape cartridge can be ejected with radio power (and/or ignition)
on or off.
How to store the tape
Press the "AM/FM" button to stop the tape player and resume
radio play. Similarly, press the "CD" button to stop the tape
player and resume CD play. Also, pressing the "TAPE" button
while the tape is playing pauses tape play.
The " X " symbol displays to indicate there is a tape in the
player. The symbol will be lit until you push the "TAPE" buton
to resume tape play.
Using the Dolby B noise reduction feature
NOTE: Noise reduction system manufactured under license
from Dolby Labs Licensing Corporation. "Dolby" and
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Push the k button to activate Dolby B noise reduction. When
on, the k symbol will appear in the display.
Tips on caring for your cassette player and tapes
In order to keep your cassette tape player performing the way it
was meant to, read and follow these simple precautions:
Only cassettes that are 90 minutes long or less should be
used. Tapes longer than 90 minutes are thinner and subject
to breakage or may jam the tape player mechanism.
Protect cassettes from exposure to direct sunlight, high
humidity and extreme heat or cold. If they are exposed to
extreme conditions, allow them to reach a moderate
temperature before playing.
216
Advertisement
Table of Contents
