Ford Villager Owner's Manual page 45

Before placing a child in the child restraint, use force to tilt
6.
the child restraint from side to side and tug it forward to
make sure it is securely held in place.
Check that the retractor is in automatic locking mode by
7.
trying to pull more belt out of the retractor. If you cannot
pull any more belt webbing out of the retractor, the belt is in
automatic locking mode.
Check to make sure the child restraint is properly secured
8.
prior to each use. If the belt is not locked, repeat steps 4
through 7.
Safety Restraints
43