Table of Contents
Advertisement
The force of the rapidly inflating passenger air bag could push
the top of the rear-facing seat against the vehicle seatback,
armrests or console. Rear-facing infant seats must always be
secured in the rear seat.
Do not place objects or mount equipment on or near the
air bag cover on the steering wheel or in front seat areas
that may come in contact with a deploying air bag.
Failure to follow this instruction may increase the risk of
personal injury in the event of a collision.
For further information about the proper mounting of
equipment in the front seat of this vehicle, please refer to Ford's
brochure entitled Some Important Information About Air Bag
Supplemental Restraint System which can be obtained by calling
Helm Inc. at 1-800-782-4356. Ask for brochure FPS-8602.
For additional important safety information on the proper use of
seat belts, child seats, and infant seats, please read the other
sections of this chapter of the Owner Guide, especially sections
entitled Safety Belts for Children and Safety Seats for Children.
How the Air Bag Supplemental Restraint System
Operates
The Air Bag Supplemental Restraint System consists of the
driver and passenger air bags, impact sensors, a system
diagnostic module, a readiness light and tone, and the electrical
wiring which connects the components.
The driver air bag is in the center of the steering wheel. The
front passenger seat air bag is located in the center of the
instrument panel ledge above the glove compartment. Both air
bags are designed to stay out of sight until they are activated.
26
R WARNING
Advertisement
Table of Contents
