Table of Contents
Advertisement
Cassette Tape Player Controls
How to insert a tape
Your cassette tape player is equipped with power loading. Once
you insert a tape and push slightly (with the open edge to the
right), the loading mechanism draws the tape the rest of the
way in and play will begin after a momentary tape tightening
process.
NOTE: A cassette tape can be loaded with the ignition on
whether or not the radio power is on. Inserting a
cassette tape with the radio power off will turn the
audio system on. After the cassette is ejected, the
audio system will turn off. Also, the antenna will be
in the down position whenever the radio is not
playing (i.e., when a cassette or compact disc is
playing or when the radio power is off).
How to locate a desired selection on the tape
There are four ways to locate a desired selection on the tape.
You can use the fast forward, rewind, "SEEK" or "SCAN"
function. Following are brief descriptions of each.
Fast forwarding the tape
1.
To fast forward the tape, press the "FF" button. The " X "
display blinks while the tape fast forwards. The radio will
automatically begin playing until fast forward is manually
stopped (by pressing "FF" button) or the end of the tape is
reached. (At the end of the tape, the direction automatically
reverses and plays the other side of the tape.)
214
Advertisement
Table of Contents
