Table of Contents
Advertisement
Your wheels and tires are match-mounted for improved ride.
Before you begin to repair a tire, mark the wheel and tire so
that they are properly aligned when remounted. This will
ensure that the tires will continue to give you the same ride
level.
When replacing full size tires, never mix radial,
bias-belted, or bias-type tires. Use only the tire sizes that
are listed on the tire pressure decal. Make sure that all
tires are the same size, speed rating, and load-carrying
capacity. Use only the tire combinations recommended on
the decal. If you do not follow these precautions, your
vehicle may not drive properly and safely.
Make sure that all replacement tires are of the same size,
type, load-carrying capacity, and tread design (e.g. "All
Terrain", etc.), as originally offered by Ford.
Failure to follow these precautions may adversely affect
the handling of the vehicle and make it easier to lose
control and roll over.
Tires that are larger or smaller than your vehicle's original tires
may affect the accuracy of your speedometer and odometer.
Wheel and Tire Matching
See an authorized tire dealer for proper servicing procedures.
Wheels and tires must be properly removed, matched and
remounted to maintain the best possible ride.
Servicing Your Villager
WARNING
WARNING
WARNING
325
Advertisement
Table of Contents
