Ford Villager Owner's Manual page 306

Hide thumbs Also See for Villager:
Table of Contents

Advertisement

Wipe the dipstick clean and put it back into position, making
5.
sure it is fully seated.
Engine oil dipstick
Carefully pull the dipstick out again. If the oil level is below
6.
the "L" line, add engine oil as necessary. If the oil level is
beyond the letter "H," engine damage or high oil
consumption may occur and some oil must be removed from
the engine.
Put the dipstick back in and make sure it is fully seated.
7.
Adding engine oil
It may be necessary to add some oil between oil changes. Make
sure you use a CERTIFIED engine oil of the preferred viscosity.
Your vehicle's warranty coverage may not apply if engine
damage is caused by the use of improper engine oil.
Add engine oil through the oil filler cap highlighted in yellow.
To add oil, remove the filler cap and use a funnel to pour oil
into the opening. Be careful not to overfill the engine. Recheck
the oil level after you finish adding oil.
312

Advertisement

Table of Contents
loading

Table of Contents