Ford Villager Owner's Manual page 237

Hide thumbs Also See for Villager:
Table of Contents

Advertisement

The Anti-Lock Brake System may not prevent brake
lock-up on extremely slippery surfaces.
High water
Do not drive through flooded areas unless you are sure that the
water is below the bottom of the wheel hubs.
If you must drive through high water, drive slowly. You may
have limited traction or wet brakes so allow extra stopping
distance because your vehicle will not stop as quickly as usual.
After you drive through the standing water, apply your brakes
gently several times as your vehicle moves slowly to help dry
the brakes.
Rocking the Vehicle
If your vehicle gets stuck (for example, in mud or snow), you
may rock it out. Shift in a steady rhythm between forward and
reverse gears. At the same time, press lightly on the accelerator.
If you are still stuck after a few minutes of rocking, call for a
tow truck.
Do not rock the vehicle for more than a few minutes. This may
overheat the engine, damage the transaxle, or damage the tires.
Driving With a Heavy Load
The Safety Compliance Certification Label, located on the
driver's door pillar, provides important information regarding
the weight limits your vehicle can safely carry or tow. The total
weight of your vehicle, including the weight of the passengers
and cargo, should never be more than the Gross Vehicle Weight
Rating (GVWR). Also, the weight that your vehicle carries on
the front axle and rear axle should never be more than the
Gross Axle Weight Rating (GAWR) for the respective axle.
Driving Your Villager
RWARNING
241

Advertisement

Table of Contents
loading

Table of Contents