Table of Contents
Advertisement
Network Control
I I I I Switching to Control by Computer
1
Start your Web browser.
Compatible browsers are Internet Explorer Ver. 5.0 or later.
Compatible operating systems are Windows 98, 98ME,
98SE, 2000 and XP.
If a Java Script run-time error appears while using
Internet Explorer, change the settings for Internet
Explorer as shown below.
1. Select Internet Options from the Tools menu,
and click the Advanced tab.
2. Make sure that the following check boxes are
set as indicated.
2
Enter the URL.
Enter the URL for this unit in the address bar of the
browser, and then press the [Enter] key. Enter the IP
address specified in the network setting for this unit. (The
URL contains the IP address that has been set for this unit
in the network settings.)
Enter the default value 192.168.0.1.
(Example: "http://192.168.0.1/")
If the port is set to a value other than the default
value of "80", add a ":" followed by the port
number to the end of the IP address.
Example if the port is set to "81"
http://192.168.0.1:81/
If you do not have a web browser installed on
your computer's hard disk, you will need to install
one.
3
Enter a password (security check).
Enter your user name and password for security checking
in the Network password entry box, and then click [OK].
If you enter an incorrect password, the password entry
screen will reappear asking you to re-enter the password.
(1) You should use separate passwords for different
user levels In accordance with the installation
environment. (See p. 20)
(2) If you choose to save the user name and password
that you enter, the security check will be cleared
automatically the next time you log on.However,
passwords that were entered at some time other
than the time when you first connected may not be
stored in some cases.
I I I I Switching to Control by Main Unit
When you click the S button on the computer operating screen, the connection will be canceled and control
will switch to the main unit.
• To forcibly cancel the connection from the main unit, press the [EXIT/OSD] button for two seconds or more. No
connections will be received by the computer for 10 seconds after the connection has been forcibly canceled.
• If communication with the computer is suspended for one minute or more, the connection will be automatically
cancelled and control will switch to the main unit.
(3) Up to a total of four computers can be connected
simultaneously to a single digital video recorder.
(However, only one computer can be connected at
a user level of ID2 or ID3.)
If the highest-level user connects from a different
computer while four computers are already
connected, the last one of the lowest-level
computers to connect is forcibly disconnected
and the highest-level user has priority.
(4) If you make more than one error entering the
password or if you click the [Cancel] button in the
password entry screen, an "AUTHENTICATION
ERROR" window will be displayed.
(5) If you click a button on the control panel that you
are not authorized to use during computer control,
the password entry screen will be displayed and
you will be prompted for a security check for the
required user level for that function.
4
Select the display language.
When the security check for the password has been
cleared, the language selection screen will appear. Select
a language and then click [OK]. The operating screen will
be displayed in the selected language and computer
control will be enabled.
(1) Select the display language each time you switch
to computer control.
(2) To change the display language, cancel the
connection temporarily and then reconnect.
IMPORTANT
• You cannot connect to the network while a menu
screen is being displayed or when operations
associated with playback are being carried out. Clear
the menu display or stop the playback operation before
reconnecting to the network.
• In some cases, you may encounter problems when
connecting to the network via a proxy server. If this
happens, the proxy setting should be canceled.
4
English
Advertisement
Table of Contents
