Table of Contents
Advertisement
SEARCH
Five search modes are provided for different recording areas and image search patterns. These let
you quickly search for images and play them back.
I I I I Basic Search Operations
1
Click the L button on the operating panel in live mode (when playback is stopped) to display the [SEARCH]
menu.
If you click the L button during playback mode, the message "IMPROPER OPERATION!" will be displayed.
2
Click to select the required search mode in the [SEARCH] menu screen.
The specified search mode screen will be displayed.
3
Search for images by using the search mode screen.
Refer to the following pages for details on the search procedures.
4
Check the search images in the preview or thumbnail screens, and then click the screen.
The mode will change to playback mode and playback will start in single-screen display.
Operations such as pausing and fast-forwarding are exactly the same as for normal playback. (See p. 24)
I I I I Search Menus
Search Mode
1
ALARM SEARCH
2
ALARM THUMBNAIL
SEARCH
TIME/DATE SEARCH
3
ARCHIVE AREA SEARCH
4
5
MOTION DETECTION
SEARCH
Search target recording area
ALARM RECORDING AREA
ALARM RECORDING AREA
NORMAL RECORDING AREA
ALARM RECORDING AREA
ARCHIVE AREA
NORMAL RECORDING AREA
ALARM RECORDING AREA
26
Notes
Searches for alarm images from the
alarm event list and plays them back.
Searches for alarm images by means
of thumbnails and plays them back.
Searches for recorded images by
date and time and plays them back.
Searches for images that have been
saved (copied) in the archive area
from the image list and plays them
back.
Searches for recorded images in
which a motion sensor recorded
movement, and plays them back.
English
Advertisement
Table of Contents
