Table of Contents
Advertisement
4. RECORDING AREA SET
The hard disk in this unit consists of three independent recording areas, each of which has five
recording modes.
A percentage of the total recording capacity is allocated to each recording area (settings are in units
of 1%).
Recording area
NORMAL RECORDING
AREA
ALARM RECORDING
AREA
ARCHIVE AREA
1
Total capacity display
Displays the total capacity of the hard disk.
If two hard disks have been installed and the
digital video recorder's HDD SET function has
been used to set mirroring to "ON", the details for
the disk with the smaller capacity will be
displayed.
2
Capacity display for each recording area
The recording capacity of each recording area of the digital
video recorder's hard drive is displayed as a percentage of
the total capacity.
The capacities of the recording areas cannot be
set and changed from a connected computer.
3
Recording area reset
If the OVERWRITE setting is "OFF", recording will stop
automatically when a recording area becomes full. If when
[AREA FULL RESET] has been selected, the recordings
that have been made will be deleted and recording will
begin again from the start of the recording area.
If the recording capacity for the normal recording
area and the alarm recording area have been set
to 0% and if the OVERWRITE setting is "ON",
there is no need to use the reset function, and so
the AREA FULL RESET button will not appear on
the screen at such times.
Recording mode
Normal recording
Manual
Timer recording
Automatic Recording is carried out automatically within
Alarm recording
Automatic Recording is carried out automatically when
Pre-alarm
Automatic Images that are around the time that the
recording
Copy
Manual
10
Menu Setting Procedures
Recording is carried out manually using the
O button.
the time range specified by the timer
recording setting made using the menu
screen.
an alarm is detected according to the alarm
recording settings made using the menu
screen.
alarm was detected are recorded
automatically according to the pre-alarm
recording settings made using the menu
screen.
This is used as a complementary function to
alarm recording.
Copies and saves essential recordings from
another recording area by using the
button on the operating panel manually.
1
2
3
Notes
M
English
Advertisement
Table of Contents
