Table of Contents
Advertisement
Menu Setting Procedures
REC RATE
This sets the recording rate for normal recording.
1
Select the recording cycle for normal recording
from the menu.
A 50, A 25, A 16.67, A 12.5, A 8.333, 6.25, 5, 4.167, 3.571,
3.125, 2.778, 2.5, 2.273, 1.923, 1.667, 1.471, 1.316, 1.190,
1.087, 1, 0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033 (Units: FPS)
The image resolution is determined by image
quality × REC RATE. The higher the image quality
and the faster the REC RATE setting, the higher is
the image resolution. However, higher image
resolutions also consume disk space more
quickly, and so the total recording time available
will be reduced. You should adjust the value as
required while considering these factors.
If pre-alarm recording is set to "ON", the REC
RATE will be limited to A 12.5 FPS.
The REC RATE during timer recording should be
set separately using the [TIMER SET] menu. (See
p. 14)
REC PROGRAM GROUP
This sets the camera images to be recorded during
normal recording.
1
Select the camera images to be recorded during
normal recording from the menu. (See p. 9)
OFF:
No program group is specified and all camera
images are recorded.
P-1:
Specifies program No. 1.
P-2:
Specifies program No. 2.
P-3:
Specifies program No. 3.
P-4:
Specifies program No. 4.
The [REC PROGRAM GROUP] for timer recording
should be set separately using the [TIMER SET]
menu. (See p. 14)
Click [SAVE] to complete the settings (or changes) for the sub-menu that is displayed on the screen. The
available time for recording under the conditions that have been set will be displayed in parentheses for
reference.
English
(Default setting: A 12.5 FPS)
(Default setting: OFF)
13
Advertisement
Table of Contents
