Saving Recorded Images; Copy To Archive Area On The Recorder - Sanyo DSR-3016P Manual For Remote Operation

Manual for remote operation by network connection
Hide thumbs Also See for DSR-3016P:
Table of Contents

Advertisement

Saving Recorded Images

Recorded images can be copied into the archive area of the hard disk or downloaded to a personal
computer.
This function is used only for saving important images that have been recorded in the normal
recording area and alarm recording area.
• Images that are copied will be saved as individual images. Moving pictures are handled by specifying the number
of images that need to be copied after the start picture. The maximum number of images that can be archived in
one copy operation is 10,000 when copying to the archive area and 1,000 when downloading to a computer.
• In order to protect the recording operation of the digital video recorder, the status of the network is checked, and
if the network is busy, the digital video recorder may be disconnected from the network depending on the
operating environment. If a command is given to transfer large volumes of data all at once (particularly when
saving 1100 or more images at a time), the digital video recorder may be disconnected from the network, so you
may need to restrict the number of images being copied at one time depending on the environment.
• If the archive area becomes filled with images, you can temporarily copy the images to another medium such as a
CompactFlash card, and then press the [AREA FULL RESET] button on the RECORDING AREA SET main menu to
reset the digital video recorder. (See p. 10)
I I I I COPY TO ARCHIVE AREA ON THE RECORDER
1
Play back the recorded images from the normal
recording area or alarm recording area, and
pause playback at the first image that is to be
copied.
2
While playback is paused, click the M button
on the operating panel.
The COPY screen will be displayed.
3
Enter the number of images in the [HOW MANY]
box.
Enter the number of successive images to be copied after
the start image.
Valid range: 1 to 10000.
A warning message will be displayed if an invalid number is
entered.
4
Click the [START] button.
Copying to the archive area will begin and copying
progress will be displayed in the message box.
Copying in progress: COPYING TO ARCHIVE AREA !
Copying finished: COPY FINISHED !
1
3
4
1
Recording date and time: The date and time that the
images were recorded.
2
PLAYBACK AREA:
The recording area where the images being played back
were recorded.
• NORMAL
• ALARM
3
HOW MANY: The number of images being copied.
4
MESSAGE BOX: Shows the copying progress.
5
START: Click this button to start copying.
30
2
5
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsr-3009p

Table of Contents