Network Control Functions; Basic Specifications For Network Control; Network Settings - Sanyo DSR-3009 Manual

Network Control Functions

Connecting this unit to a network will enable computer control (remote operation).
CAMERA
CAMERA
I I I I Basic Specifications for Network Control
1. Operations such as menu settings, recording and playback can be done on the computer screen.
Furthermore, the multiplexer function allows images from multiple cameras that are connected to the
main unit to be displayed in multi-screen format on the computer's screen.
2. Up to a total of four computers can be connected simultaneously to a single digital video recorder
(DVR): 3 computers that are connected while logged in at a user level of ID1, and one other computer
that is logged in at a user level of ID2 or ID3.
3. Control can be switched freely between main unit control and computer control as required.
Simply connecting a cable will not affect the operation of the main unit.
4. For security over computer control, identity checks (passwords) can be specified for three user levels.
I I I I Network Settings
1. The following main unit network settings must be made beforehand if this unit is to be used when
connected to a network. Refer to "Network Set settings" in the main unit Instruction Manual for details
on how to make the settings.
2. Also change the TCP/IP settings for the computers that are connected in accordance with the
operating system (OS) that is being used by these computers.
If using an existing network, the IP address that you set must not be the same as an existing IP address being used on the
network. Check with the network administrator for details.
English
1
DVR 2
4
DVR 1
3
3
CAMERA
DVR 3
2
CAMERA
DVR 4
(DVR: Digital Video Recorder)