Sanyo DSR-3016P Manual For Remote Operation

Manual for remote operation by network connection
Hide thumbs Also See for DSR-3016P:
Table of Contents


Digital Video Recorder

Manual for Remote Operation by Network Connection
Bedienungsanleitung für die Fernbedienung über ein Netzwerk
Manuel pour la commande à distance sur une connexion de réseau
Manual para control remoto a través de una red
Manuale per il funzionamento a distanza tramite collegamento di rete


Table of Contents

Summary of Contents for Sanyo DSR-3016P

  • Page 1: Digital Video Recorder

    DSR-3016P Digital Video Recorder DSR-3009P Manual for Remote Operation by Network Connection English Bedienungsanleitung für die Fernbedienung über ein Netzwerk Deutsch Manuel pour la commande à distance sur une connexion de réseau Français Manual para control remoto a través de una red Español...
  • Page 2: Table Of Contents

    Contents Network Control Functions ... 3 9. ALARM REC MODE SET ... . 15 PICTURE QUALITY ......15 Basic Specifications for Network Control .
  • Page 3 Saving setting values for a whole menu screen COPYRIGHTS This manual and the software are copyrighted materials from Sanyo Electric Co., Ltd. © 2002. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Internet Explorer is a registered trademark of Microsoft Corporation.
  • Page 4: Network Control Functions

    Network Control Functions Connecting this unit to a network will enable computer control (remote operation). CAMERA CAMERA DVR 2 DVR 3 CAMERA CAMERA DVR 1 DVR 4 (DVR: Digital Video Recorder) I I I I Basic Specifications for Network Control 1.
  • Page 5: Network Control

    Network Control I I I I Switching to Control by Computer Start your Web browser. (3) Up to a total of four computers can be connected simultaneously to a single digital video recorder. Compatible browsers are Internet Explorer Ver. 5.0 or later. (However, only one computer can be connected at Compatible operating systems are Windows 98, 98ME, a user level of ID2 or ID3.)
  • Page 6: Displays That Appear While Connected

    Network Control I I I I Displays That Appear While Connected Messages appear on the screen for a short period to indicate control switching and network connection status. Main unit display 1. When control is switched to a computer 3. When the connection is forcibly canceled from the main unit When the web browser is started and the specified procedure is followed, operation switches to the computer...
  • Page 7: Operating Panel And Operation Permissions

    Operating Panel and Operation Permissions Playback buttons Previous event (ID2/3) Used to playback from immediately before an alarm event. Next event (ID2/3) Used to playback from immediately after the next alarm event. Speed down (ID2/3) Used to reduce the playback speed by one step. Speed up (ID2/3) Used to increase the playback speed by one step.
  • Page 8: Settings

    Settings To use the functions of this unit effectively, the recording conditions and installation environment must be specified beforehand. These setting items are arranged and displayed in two levels consisting of the main menu and sub-menus. Refer to the setting procedures for each menu on the following pages for details on the various setting methods.
  • Page 9: Menu Setting Procedures

    Menu Setting Procedures 1. CLOCK SET This sets the main unit clock to the current time. Select “Day/Month/Year Hour/Minute” from the menu. The day of the week is selected automatically based on the date. Click [SET] to set the time. 2.
  • Page 10: Program Rec Set

    Menu Setting Procedures 3. PROGRAM REC SET When more than one camera is connected to the digital video recorder, the camera rate (unique rec rate for each camera) can be set separately for each camera. In addition, you can make up to four programs that include settings such as the method of combining the images from each recording camera and individual camera rates.
  • Page 11: Recording Area Set

    Menu Setting Procedures 4. RECORDING AREA SET The hard disk in this unit consists of three independent recording areas, each of which has five recording modes. A percentage of the total recording capacity is allocated to each recording area (settings are in units of 1%).
  • Page 12: Recording Conditions Set

    Menu Setting Procedures 5. RECORDING CONDITIONS SET This sets the overwrite conditions and remaining disk capacity warning criteria for each recording area. NORMAL RECORDING AREA OVERWRITE (Default setting: ON) This specifies whether to stop recording or to continue recording by overwriting images that are currently recorded on the hard disk when the normal recording area has become full.
  • Page 13: Normal Rec Mode Set

    Menu Setting Procedures 6. NORMAL REC MODE SET This specifies the recording conditions for normal recording and timer recording. PICTURE QUALITY (Default setting: ENHANCED) This sets picture quality for normal recording. Select a picture quality mode from the menu. • BASIC (basic quality) •...
  • Page 14: Rec Rate

    Menu Setting Procedures REC RATE (Default setting: A 12.5 FPS) This sets the recording rate for normal recording. Select the recording cycle for normal recording from the menu. A 50, A 25, A 16.67, A 12.5, A 8.333, 6.25, 5, 4.167, 3.571, 3.125, 2.778, 2.5, 2.273, 1.923, 1.667, 1.471, 1.316, 1.190, 1.087, 1, 0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033 (Units: FPS) The image resolution is determined by image...
  • Page 15: Timer Set

    Menu Setting Procedures 7. TIMER SET This lets you set the conditions for timer recording, such as the timer operating time, separately for each day of the week. Select the timer recording conditions for each weekday from the menu. Click [SAVE] to complete the timer settings (or changes). WEEK Specifies the weekdays for making timer recordings.
  • Page 16: Holiday Set

    Menu Setting Procedures 8. HOLIDAY SET This menu is used to specify particular days as holidays. The timer recording operation on specified holidays will be the same as that for Sundays. A holiday setting can be made for days such as national holidays and company holidays when the same level of security as for Sundays is required.
  • Page 17: Alarm Recording

    Menu Setting Procedures ALARM RECORDING This specifies whether alarm recording will be carried out or not, and sets the recording cycle and recording conditions when alarm recording is carried out. Select an alarm recording mode from the [ALARM RECORDING] menu (Default setting: OFF).
  • Page 18: Pre-Alarm Recording

    Menu Setting Procedures PRE-ALARM RECORDING This specifies whether pre-alarm recording will be carried out or not, and sets the recording conditions when pre-alarm recording is carried out. (See p. 22) Select “ON/OFF” from the [PRE-ALARM RECORDING] menu. • ON: Pre-alarm recording is carried out. •...
  • Page 19: Alarm Duration Set

    Menu Setting Procedures 10. ALARM DURATION SET The duration of alarm recording can be set separately for each camera. The DURATION (2) setting for each camera that is made using the [ALARM DURATION SET] menu is effective when [DURATION] in the [ALARM RECORDING] menu is set to “INDIV.”...
  • Page 20: Rs-232C/Rs-485 Set

    Menu Setting Procedures 12. RS-232C/RS-485 SET This displays information related to the digital video recorder’s interface. This menu only lets you check the settings; it ALARM INFO cannot be used to change the settings. For RS-485 communication, this specifies whether CONTROL alarm information is to be transmitted or not.
  • Page 21: Network Set

    Menu Setting Procedures 14. NETWORK SET When the digital video recorder is connected to a network, NETWORK SET is used to make settings beforehand from the main unit, but the settings that have been specified from the main unit can also be changed from the computer.
  • Page 22: Hdd Set

    Menu Setting Procedures 15. HDD SET This displays hard disk information. In addition, if another hard disk has been added and mirroring recording by the digital video recorder has been set to “ON”, you can also set the drive to be given priority for the reading of data.
  • Page 23: Recording Images

    Recording Images This digital video recorder can record images being monitored and alarm on the internal hard disk by the methods specified below. In order to record images, the necessary menu settings should be made beforehand in accordance with the installation environment. (See p. 7) I I I I Normal recording This is a manual operation for recording live images that are currently being viewed into the normal recording area.
  • Page 24: Viewing Images

    Viewing Images Live images and recorded images can both be viewed while monitoring is in progress at any time when required. Operations such as switching between live images and recorded images that are being played back and changing the display screen do not have any effect on other operations such as timer recording and alarm recording.
  • Page 25: Specifying The Number Of Display Screens

    Viewing Images I I I I Specifying the Number of Display Screens(1) If more than one camera is connected to the digital video recorder, multiple camera images can be displayed on the screen in a multi-screen format. To do this, you need to specify the channel numbers for the monitoring cameras that are to be displayed on the monitor screen.
  • Page 26: Image Adjustment

    Viewing Images Live mode screen Playback mode screen I I I I Image Adjustment NORMAL RECORDING MODE The current normal recording mode is shown for reference. The display screen can be adjusted using the • STOP following adjustments. • RECORDING Select the adjustment values from the menus, and •...
  • Page 27: Search

    SEARCH Five search modes are provided for different recording areas and image search patterns. These let you quickly search for images and play them back. I I I I Basic Search Operations Click the L button on the operating panel in live mode (when playback is stopped) to display the [SEARCH] menu.
  • Page 28: Search Mode Operations

    Search Mode Operations 1. ALARM SEARCH This displays a list of all alarm events recorded in the alarm recording area by alarm number. Alarm images are searched for by alarm number and played back. Select [ALARM SEARCH] from the [SEARCH] menu.
  • Page 29: Time/Date Search

    Search Mode Operations 3. TIME/DATE SEARCH Images in the normal recording and the alarm recording area can be specified by time and date and played back. Select [TIME/DATE SEARCH] from the [SEARCH] menu. The TIME/DATE SEARCH screen will appear. Specify the channel (camera number) that you wish to play back in the [CHANNEL] menu.
  • Page 30: Motion Detection Search

    Search Mode Operations 5. MOTION DETECTION SEARCH If a motion sensor has been set to detect movement in a particular camera view, and images for that view have been saved in the normal recording area or alarm recording area, you can search for those images that have changed as a result of movement by an intruder, for example, and play back those images.
  • Page 31: Saving Recorded Images

    Saving Recorded Images Recorded images can be copied into the archive area of the hard disk or downloaded to a personal computer. This function is used only for saving important images that have been recorded in the normal recording area and alarm recording area. •...
  • Page 32: Download To Pc

    Saving Recorded Images I I I I DOWNLOAD TO PC Recorded images can be copied into the archive area of the hard disk or downloaded to a personal computer. Pause image playback at the image that will be the starting point for downloading. Play back recorded images and pause playback at the image that will be the starting point for downloading.
  • Page 33: Image Viewer Screen

    Saving Recorded Images * Image Viewer Screen This lets you check the downloaded images. Thumbnail images PLAY SPEED This displays the first image. This sets the playback speed (cycle). 1 1000msec PREV. 2 500msec This displays the previous image. 3 250msec R.PLAY 4 100msec This plays back the images in reverse.
  • Page 34 Printed on recycled paper Gedruckt auf recyceltem Papier Imprimé sur du papier recyclé Impreso en papel reciclado SANYO Electric Co., Ltd. Stampato su carta riciclata 1AC6P1P2524-- L8HBA/XE, XE2, UK, UK2, L8HBB/XE, XE2, UK, UK2, (0702KP-CZ) Printed in Japan...

This manual is also suitable for:


Table of Contents