Network Set Setting; Network Connection - Sanyo DSR-3000 Instruction Manual

Hide thumbs Also See for DSR-3000:
Table of Contents

Advertisement

Available languages

Available languages

NETWORK SET SETTING

Main menu 2
<MAIN MENU 2>
1.DISPLAY/VIDEO LOSS SET
2.RS-232C/RS-485 SET
3.BUZZER SET
4.SECURITY LOCK SET
5.NETWORK SET
6.HDD SET
7.POWER FAILURE/USED TIME
TO MAIN MENU 1
MOVE LINES WITH JOG. SELECT WITH SHUTTLE
Sets the three levels of user passwords.

Network connection

Insert a recommended PCMCIA-compatible Ethernet card into the PC card slot at the rear of the digital video recorder.
This will enable you to view images on this unit and make menu settings through the network (LAN) from a personal computer. ID1,
ID2 or ID3 and passwords are required.
Note:
Up to four computers can be connected simultaneously to the DVR main unit. However, if four computers are already connected
and then another computer is connected at a user level that is higher than the user levels that are currently being used, any users
who are logged on at lower levels will be forcibly logged off, and the computer being connected at the higher level will have priority.
If all four computers that are already connected are connected at user level ID1, the last user to connect will be disconnected.
The PC card slot is for 16 bit 5 V cards only. Do not use 32 bit card bus types of card, as they may damage the PC card slot of the
digital video recorder.
• When connecting directly to the computer
(without using an Ethernet hub)
Main monitor
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
TV monitor
(sold separately)
DIGITAL IN
1
3
2
Inserting the recommended LAN card
(Installed)
1
3
2
Locking can be carried out
easily by sliding the knob.
Sub-menus
<NETWORK SET>
LAN CARD
->
->
NETWORK CONTROL : OFF
->
IP ADDRESS
->
SUBNET MASK
->
GATEWAY
->
PORT
->
ID
ID1
->
ID2
ID3
1 – 16
DIGITAL IN
DIGITAL OUT
STP (shielded twisted pair) Cable
(straight-type CAT-5, 3 m or less)
DIGITAL OUT
Computer
Always use a cross-type
Ethernet cable.
(Removed)
3
2
1
Return the knob after
unlocking.
Sets LAN card.
: LAN1
Sets NETWORK control.
: 192.168. 0. 1
: 255.255.255. 0
:
0. 0. 0. 0
Enter IP ADDRESS.
: 00080
: PASSWORD (4-8)
: 1111----
: 2222----
Enter SUBNET MASK.
: 3333----
Enter GATEWAY.
Sets the port.
• When connecting via an intranet (using an Ethernet hub)
Main monitor
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
TV monitor
(sold separately)
DIGITAL IN
1
3
2
Always use a straight-
type Ethernet cable.
66
1 – 16
DIGITAL IN
DIGITAL OUT
STP (shielded twisted pair) Cable
(straight-type CAT-5, 3 m or less)
DIGITAL OUT
Ethernet switching hub
Computer
Intranet
Computer
Ethernet switching hub
English

Advertisement

Table of Contents
loading

Table of Contents