Table of Contents
Advertisement
. ' # ) A 9 # 8 # 5 9 ) $ D Q Q M T V R ' ' ' ' ' ' ' '
NETWORK CONFIGURATION
This system consists of DVRs, monitoring cameras and computer terminals that are used for remote
monitoring. All devices in the system are connected through a dedicated local area network (LAN).
Applicable models:
DSR-M800/DSR-M800P/DSR-M800PA/DSR-M804/DSR-M804P/DSR-M810/DSR-M810P/
DSR-M814/DSR-M814P
See "http://www.sanyosecurity.com" for models other than the above.
Network configurations can include a combination of different models.
Number of DVR connections:
Standard 1000 DVRs (Up to 4000 DVRs can be connected depending on the subnet mask
values.)
Number of computer terminal connections:
Max. 8 computers (1 master computer + 7 slave computers)
Applicable software:
If using this software (VA-SW814 or VA-SW81LITE) on the master computer, then the slave
computers must also be running the same version of software. Older versions of the software
(VA-SW800/804/814 Ver. 1.0/80LITE) cannot be used with this software.
Slave computers that are running older versions of the software should be upgraded
by installing this software. Once the software upgrade has been carried out, you can
continue to use the same accessory hardware key as before. (P.8)
Switching Hub
English
Master computer
Switching Hub
DVR1
DVR2
3
' ' '
Slave computer
DVR3
DVR4
Advertisement
Table of Contents
