Table of Contents
Advertisement
42
en | Recording
Note: For more information about Automatic Network Replenishment (ANR), refer to the White
Paper "ANR 2.0 Automatic Network Replenishment (ANR)," available on the product page for
your camera. Access the product page on the online product catalog through the appropriate
link from https://www.boschsecurity.com/xc/en/product-catalog/.
7.2.3
Activating and configuring storage media
Available media or iSCSI drives must be transferred to the Managed storage media list,
activated, and configured for storage.
Note:
An iSCSI target storage device can only be associated with one user. If a target is being used
by another user, ensure that the current user no longer needs the target before decoupling
that user.
1.
2.
3.
7.2.4
Formatting storage media
All recordings on a storage medium can be deleted at any time. Check the recordings before
deleting and back-up important sequences on the computer's hard drive.
1.
2.
3.
4.
7.2.5
Deactivating storage media
A storage medium in the Managed storage media list can be deactivated. It is then no longer
used for recordings.
1.
2.
7.3
Recording Profiles
A recording profile contains the characteristics of the tracks that are used for recording. These
characteristics can be defined for ten different profiles. The profiles can then be assigned to
days or times of day on the Recording Scheduler page.
Each profile is color-coded. The names of the profiles can be changed on the Recording
Scheduler page.
To configure a profile, click its tab to open its settings page.
–
–
–
2023-01 | 1.2 |
In the Storage overview section, double-click a storage medium, an iSCSI LUN or one of
the other available drives.
–
The medium is added as a target in the Managed storage media list.
–
Newly added media is shown as Not active in the Status column.
Click Set to activate all media in the Managed storage media list.
–
The Status column shows all media as Online.
Check the box in the Rec. 1 or Rec. 2 column to specify the recording tracks to be
recorded on the target selected.
Click a storage medium in the Managed storage media list to select it.
Click Edit below the list.
Click Format in the new window to delete all recordings in the storage medium.
Click OK to close the window.
Click a storage medium in the Managed storage media list to select it.
Click Remove below the list. The storage medium is deactivated and removed from the
list.
To copy the currently visible settings to other profiles, click Copy Settings. A window
opens to select the target profiles for the copied settings.
If you change a profile's settings, click Set to save.
If necessary, click Default to return all settings to their factory defaults.
User Manual
AUTODOME IP starlight 5100i IR
Bosch Security Systems
Advertisement
Table of Contents
