Table of Contents
Advertisement
36
en | Configuration
3.
Deactivating storage media
A storage medium in the Managed storage media list can be deactivated. It is then no
longer used for recordings.
1.
2.
Formatting and wiping storage media
Formatting the storage media can be necessary to delete all data and recreate a valid file
structure to be usable.
All recordings on a storage medium can be deleted at any time. Check the recordings before
deleting and back-up important sequences on the computer's hard drive.
1.
2.
3.
4.
Wiping the storage media deletes all data without recreating a valid file structure.
To wipe the recordings from the storage media:
1.
2.
3.
4.
Click Set to apply the changes.
4.5.2
Recording Profiles
A recording profile contains the characteristics of the tracks that are used for recording.
These characteristics can be defined for ten different profiles. The profiles can then be
assigned to days or times of day on the Recording Scheduler page.
Each profile is color-coded. The names of the profiles can be changed on the Recording
Scheduler page.
To configure a profile click its tab to open its settings page:
–
–
–
Stream profile settings
Select the encoder profile setting that is to be used with stream 1 and 2 when recording.
This selection is independent of the selection for live stream transmission. (The properties
of the encoder profiles are defined on the Encoder Profile page.)
Select the stream2 pre-position scene that is to be used for recording. (The stream2 pre-
positions for stream 2 are configured on the Live page.)
Settings for selected recordings
Select a recording listed in the table to configure the respective settings.
Recording includes
Select what is to be included in the recordings:
–
–
2023-10 | V02 | F.01U.407.683
Check the box in the Rec. 1 or Rec. 2 column to specify the recording tracks to be
recorded on the target selected.
Click a storage medium in the Managed storage media list to select it.
Click Remove below the list. The storage medium is deactivated and removed from the
list.
Click a storage medium in the Managed storage media list to select it.
Click Edit below the list.
Click Format in the new window to delete all recordings in the storage medium.
Click OK to close the window.
Click a storage medium in the Managed storage media list to select it.
Click Edit below the list.
Click Wipe in the new window to wipe the recordings in the storage medium.
Click Close to close the window.
To copy the currently visible settings to other profiles, click Copy Settings. A window
opens to select the target profiles for the copied settings.
If you change a profile's settings, click Set to save.
If necessary, click Default to return all settings to their factory defaults.
Audio: If audio is not enabled, Off is shown. Click on Off and the page is redirected to
the Audio section.
Metadata.
User Manual
FLEXIDOME corner 7100i IR
Bosch Security Systems
Advertisement
Table of Contents
