Table of Contents
Advertisement
66
en | Using the AutoDome 800 Series
Scan 360
Click this button to start a continuous 360° pan. To stop the continuos pan, click a directional
control in the View Control tab.
Autopan
Click this button to pan the AutoDome between user-defined limits. To set the left and right
pan limits, refer to Section 7.24 PTZ Settings, page 87, so set the Autopan limits. To stop the
continuos pan, click a directional control in the View Control tab.
Tour A / Tour B
Click one of these buttons to start the playback of a recorded (guard) tour. A Recorded Tour
saves all manual camera movements made during the recording, including its rate of pan, tilt
and zoom speeds and other lens setting changes. Refer to Section 7.24 PTZ Settings, page 87,
to program a recorded tour. To stop a tour, click a directional control in the View Control tab.
6.7
Saving Snapshots
You can save individual images from the video sequence currently shown on the Livepage in
JPEG format on your computer's hard drive. The icon for recording single images is only
visible if the unit is configured to enable this process.
6.8
Recording Video Sequences
You can save sections of the video sequence currently shown on the Livepage on your
computer's hard drive. The icon for recording video sequences is only visible if the unit is
configured to enable this process.
1.
2.
3.
Image Resolution
Sequences are saved at the resolution that has been preset in the configuration for the
encoder (see Section 7.3 Basic Mode: Network, page 72).
6.9
Processor Load
If the AutoDome 800 Series is accessed via the Web browser, you will see the processor load
indicator in the top left of the window next to the manufacturer's logo.
F.01U.273.797 | 5.0 | 2012.08
Click the icon. The storage location depends on the configuration of the AutoDome 800
Series.
Click the icon to start recording. The storage location depends on the configuration of
the AutoDome 800 Series. A red dot in the icon indicates that recording is in progress.
Click the icon again to stop recording.
To change the storage location for the recorded video, navigate to the Livepage settings
on the Settings page.
Installation Manual
AutoDome 800 Series HD PTZ Camera
Bosch Security Systems, Inc.
Advertisement
Table of Contents
