Service Instructions - Rexel CB345E Service And Parts Manual

FLOWLINE BINDER RANGE - SERVICE INSTRUCTIONS
ALWAYS :-
DISCONNECT ELECTRICALLY POWERED MACHINES FROM MAINS SUPPLY BEFORE
DISCHARGE CAPACITOR BY SHORTING TERMINALS USING AN INSULATED
REPLACE WIRE STRAPS IN ORIGINAL POSITIONS TO HOLD WIRES FIRMLY IN
PLACE AND PREVENT FOULING MOVING PARTS AND SHARP EDGES.
THOROUGHLY TEST MACHINE BEFORE PLACING BACK INTO SERVICE.
SECTION 1 – DOCUMENT SUPPORT/LID
ALL MODELS
Removal :-
1. Unlock operating handle and lift to fully raised position (Not CB345e or CB355e).
2. Lift document support/lid to raised position.
3. Squeeze together outer pairs of hinge arms, until hinge lugs disengage, and pull back lid to remove
hinge arms from top casing slots.
Replacement :-
1. Squeeze together outer pairs of hinge arms and locate all hinge arms into top casing slots until
hinge lugs engage in locations in casing.
IMPORTANT NOTE
COMMENCING WORK.
SCREWDRIVER.
Page 22 of 55
ILLUSTRATED PARTS MANUAL:
FLOWLINE COMB & WIRE
BINDER RANGE