Rexel CB345E Service And Parts Manual page 54

ISSUE DECRIPTION
NO
1 Original
2 Page 15 – Model WB705E – Part No D55237,
WB705E LED PCB Cover added
3 Part No D55236 – Gear Box Shaft Retainer added to
all Models. Omitted in error on original compilation.
4 Part No D55242 – Thermal Fuse Assembly added to
all Models. Additional safety feature should the
automatic thermal cut out in the Motor fail.
5 Part Nos D55241 – Compound Gear 41/10T (Metal) &
PLN29 – M5 Plain Washer to replace D55190 on all
Models to prevent failure under extreme abuse.
6 Part Nos SL18-361 – Cable Clamp and SCR718 – M4
x 10 Plasform screw added all Models to secure
Ribbon Cable between Main and Switch PCB's
7 Part No SL18-377 – Insulating Tape added to all
Models to give extra protection to the Ribbon Cable
between Main and Switch PCB's
8 Part No SL18-377 x 100mm changed to SL18-380 x
75mm length. Part No Duplicated.
9 Part No D000430 – Wire Adjuster Indicator Decal no
longer required. Scale pad printed directly onto Fixed
Jaw itself (part No D55083B).
10 Wire closing mechanism on WB705E improved.
11 The additional Thermal Fuse Assy (See Issue 4 above)
is no longer required as the automatic thermal cut out
in the Motor has been uprated.
12 Part No D55240 – Compound Gear 41/10T (Sintered)
replaces D55241 and PLN29 (See Issue 5 above)
13 Australian variants to Model CB355E, CB405E and
WB705E added. Specification for all models added
(Pages 42 – 45)
14 On/Off switch added to all Models resulting in new
Main (SL17-314) and LED (SL17-313) PCB's and
additional Part No SL18-383 – Printed Button, with
Part Nos D55247 – Ribbon Cable Bridge Piece and
SCM160 – M4 x 12 Pan Torx Taptite Screw (1 off)
added to CB405E and WB705E only
AMENDMENT RECORD SHEET
Page 54 of 55
ILLUSTRATED PARTS MANUAL:
FLOWLINE COMB & WIRE
BINDER RANGE
SERIAL
NO
A665070
-
A670764
A678191
A677022
A677022
A677022
A692162
A692162
A694090
A710069
A715715
A717393
CB355E
A721022
CB405E
A721641
CB345E
CARO
NO
301
538
-
558
549
Issue 2
564
571
587
577
585
558
548
603
598