Assembly Guide - Bowflex Xtreme Assembly And Owner's Manual

4
Step 1 Base Frame Assembly
Parts:
• Base Frame
• Left Frame Rail
Hardware:
• 6 Button Head Screws ( 3/8" X 3/4")
• 6 Flat Washers (3/8")
Tool:
7/32" Allen Wrench
(or Hex Wrench)
1-1
Lay all parts on floor as
shown.
1-2
Insert Frame Rail
connectors into the
Base Frame and
Rear Cross Member.
Secure with screws
and washers as shown.
Do not tighten screws
at this time.
Step 2 Lower Lat Tower Assembly
Parts:
• Lower Lat Tower Frame
• Rod Box with Power Rod
Hardware:
• 3 Self Threading Screws (#10 X 1")
• 3 Flat Washers (1/4")
Tool:
Phillips Screw Driver
2-1
Lay parts on floor as shown.
Firmly slide Rod Box into Lower
Lat Tower Frame.
2-2
Fasten the Rod Box to the
Lower Lat Tower Frame with
screws and washers as shown.
Tighten screws until snug.

Assembly Guide

• Right Frame Rail
• Rear Cross Member
Unit
®