Bowflex Xtreme Assembly And Owner's Manual page 13

Step 15 Install Upper Lat Tower Assembly
Parts:
• Upper Lat Tower Assembly
• Main Assembly
Hardware
(1:1):
• 6 Button Head Screws (3/8" X 3/4")
• 6 Washers (3/8")
Tool:
7/32" Hex Wrench
15-1
Position the Upper Lat Tower Assembly
over the Lower Lat Tower Assembly.
15-2
Slide the Upper Lat Tower onto the
Lower Lat Tower and secure with screws
and washers as shown.
Upper Lat Tower
Flat
Washers
Button Head
Screws
Assembly Guide
Rods not shown
for clarity
Lower Lat Tower
Flat
Washers
Button Head
Screws
TIGHTEN HARDWARE
Carefully go over the entire Bowflex
Xtreme home gym and tighten all
™
hardware before using.
11