Assembly Guide; Base Frame Assembly; Lower Lat Tower Assembly - Bowflex Xtreme 2 SE Assembly Manual

step 1 Base Frame Assembly
Parts:
• Base Frame
• Left Frame Rail
Hardware:
• 6 Button Head Screws ( 3/8" X 3/4")
• 6 Flat Washers (3/8")
tool:
7/32" Hex Wrench
1-1
Lay all parts on floor as
shown .
1-2
Insert Frame Rail
connectors into the
Base Frame and
Rear Cross Member .
Secure with screws
and washers as shown .
finger tighten screws
at this time.
step 2 Lower Lat Tower Assembly
Parts:
• Lower Lat Tower Frame
• Rod Box with Power Rod
Hardware:
• 3 Phillips Screws (#10 X 1")
• 3 Flat Washers (1/4")
tool:
Phillips Screw Driver
2-1
Lay parts on floor as shown. Firmly
slide Rod Box into Lower Lat Tower
Frame .
2-2
Fasten the Rod Box to the
Lower Lat Tower Frame with
screws and washers as shown .
Tighten screws until snug.
6
Bowflex Xtreme 2 SE Assembly Manual
®

Assembly Guide

• Right Frame Rail
• Rear Cross Member
Button Head Screw
Lower Lat Tower Frame
Pack
®
Left Frame Rail
Base Frame
Flat Washer
Flat Washers
Self Threading
Screws
Button Head Screw
Flat Washer
Button Head Screw
Flat Washer
Rear Cross
Member
Right Frame Rail
Rod Box w/ Rods