Charge Phone Battery Using Power Supply - Cisco 7925G Installing Manual

Phone Power

Charge Phone Battery Using Power Supply

Use the following figure and steps to charge the phone battery quickly.
Figure 4: Charge the Phone Battery
Procedure
Step 1 Lift the mini-USB port cover on the bottom of phone.
Step 2
Swing the port cover to one side.
Step 3 Insert the AC power supply mini-USB connector in the port.
Step 4 Insert the AC plug adapter in the slot on the power supply.
Step 5 Insert the AC power supply in a wall outlet.
The indicator light indicates the charging status:
Red
Battery charging in process.
Green
Battery charging is complete.
Note
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
12
You can use the phone while the battery is being charged. For charging times, see
page 8.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Setup
Phone Power, on