Charge The Battery With The Ac Power Supply - Cisco 8821 Setup

Phone Setup
Procedure
Step 1
Catch the edge of a prong with your finger and pull the prong up until it clicks into position.
Step 2 (Optional) Install the international power clip.
Step 3
(Optional) Before you close the adapter, remove the international power clip.
Step 4 (Optional) Hold the lever on the top of the adapter down and press the prongs down to close the adapter.

Charge the Battery with the AC Power Supply

You can charge your phone using an AC power supply. When you use the power supply to charge your phone,
the battery can take up to 3 hours to fully charge.
The wide connector on the USB cable connects to the phone using magnets to hold it secure. It has pins that
you need to align correctly. If you hold the phone so that the screen is towards you, the battery icon on the
connector is visible.
Charge the Battery with the AC Power Supply
Phone Setup
13