Wps Screen - ZyXEL Communications NBG6503 User Manual

Chapter 10 Wireless LAN
The following table describes the labels in this screen.
Table 37 Network > Wireless LAN 2.4G/5G > QoS
LABEL
Enable WMM
QoS
Apply
Cancel

10.8 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS
tab.
Figure 66 Network > Wireless LAN 2.4G/5G > WPS
The following table describes the labels in this screen.
Table 38 Network > Wireless LAN 2.4G/5G > WPS
LABEL
WPS Setup
Enable WPS
PIN Number
Status
Status
94
DESCRIPTION
Check this to have the Router automatically give a service a priority level according to the
ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of
Service) gives high priority to voice and video, which makes them run more smoothly.
Click Apply to save your changes to the Router.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select this to enable the WPS feature.
This displays a PIN number last time system generated. Click Generate to generate a
new PIN number.
This displays Configured when the Router has connected to a wireless network using
WPS or when Enable WPS is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the Router or you click Release_Configuration to remove the
configured wireless and wireless security settings.
NBG6503 User's Guide