No Security - ZyXEL Communications NBG6503 User Manual

Table 31 Network > Wireless LAN 2.4G/5G > General (continued)
LABEL
Channel
Selection
Operating
Channel
Security
Security Mode
Apply
Reset
See the rest of this chapter for information on the other labels in this screen.

10.4.1 No Security

Select No Security to allow wireless stations to communicate with the access points without any
data encryption.
Note: If you do not enable any wireless security on your Router, your network is
accessible to any wireless networking device that is within range.
Figure 60 Network > Wireless LAN 2.4G/5G > General: No Security
NBG6503 User's Guide
DESCRIPTION
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the frequency
band and the country you are in.
Refer to the Connection Wizard chapter for more information on channels. This option is
only available if Auto Channel Selection is disabled.
This displays the channel the Router is currently using.
Select WEP, WPA, WPA2, WPA-PSK or WPA2-PSK to add security on this wireless
network. The wireless clients which want to associate to this network must have same
wireless security settings as the Router. After you select to use a security, additional options
appears in this screen. See 10.4.2, and
Or you can select No Security to allow any client to associate this network without
authentication.
Note: If you enable the WPS function, only No Security, Static WEP, WPA-PSK and WPA2-
PSK are available in this field.
Click Apply to save your changes back to the Router.
Click Reset to reload the previous configuration for this screen.
Chapter 10 Wireless LAN
10.4.3 sections.
87