ZyXEL Communications NBG6503 User Manual page 98

Chapter 10 Wireless LAN
The following table describes the labels in this screen.
Table 41 Network > Wireless LAN 2.4G > WDS
LABEL
WDS Setup
Basic Settings
Local MAC
Address
Phy Mode
Remote MAC
Address
Security
EncrypType
EncrypKey
Apply
Cancel
98
DESCRIPTION
Select the operating mode for your Router.
• AP + Bridge - The Router functions as a bridge and access point simultaneously.
• Bridge - The Router acts as a wireless network bridge and establishes wireless links with
other APs. You need to know the MAC address of the peer device, which also must be in
bridge mode. The Router can establish up to five wireless links with other APs.
This is the MAC address of your Router.
Select the Phy mode you want the Router to use. This dictates the maximum size of packets
during data transmission.
This is the MAC address of the peer device that your Router wants to make a bridge
connection with.
You can connect to up to 4 peer devices.
Select whether to use WEP, TKIP or AES encryption for your WDS connection in this field.
Otherwise, select No Security.
The Encryp key is used to encrypt data. Peers must use the same key for data transmission.
Click Apply to save your changes to Router.
Click Cancel to reload the previous configuration for this screen.
NBG6503 User's Guide