Lan Ip Screen; Ip Alias Screen - ZyXEL Communications NBG6503 User Manual

12.4 LAN IP Screen

Use this screen to change the IP address for your Router. Click Network > LAN > IP.
Figure 78 Network > LAN > IP
The following table describes the labels in this screen.
Table 46 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Reset

12.5 IP Alias Screen

Use this screen to have the Router apply IP alias to create LAN subnets. Click LAN > IP Alias.
Figure 79 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 47 Network > LAN > IP Alias
LABEL
IP Alias
IP Address
NBG6503 User's Guide
DESCRIPTION
Type the IP address of your Router in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address. Your Router will
automatically calculate the subnet mask based on the IP address that you assign. Unless
you are implementing subnetting, use the subnet mask computed by the Router.
Click Apply to save your changes back to the Router.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Check this to enable IP alias.
Type the IP alias address of your Router in dotted decimal notation.
Chapter 12 LAN
111