Ap Mode Status Screen - ZyXEL Communications NBG6503 User Manual

Chapter 8 Access Point Mode

8.4 AP Mode Status Screen

Click to open the Status screen.
Figure 46 Status Screen: Access Point Mode
The following table describes the labels shown in the Status screen.
Table 28 Status Screen: Access Point Mode
LABEL
Logout
Device Information
Host Name
Firmware Version
Sys OP Mode
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- Default Gateway
- DHCP
68
DESCRIPTION
Click this at any time to exit the Web Configurator.
This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
This is the firmware version and the date created.
This is the device mode (Section 5.1.2 on page
Point Mode.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN Ethernet default gateway of your device.
This shows the LAN port's DHCP role - Server, Client or None.
43) to which the Router is set - Access
NBG6503 User's Guide