ZyXEL Communications NBG6503 User Manual page 29

Table 8 Wireless Security: WPA-PSK/WPA2-PSK (continued)
LABEL
Security mode
Wireless
password
Verify Password
Exit
Back
Next
Congratulations! Open a web browser, such as Internet Explorer, to visit your favorite website.
Note: If you cannot access the Internet when your computer is connected to one of the
Router's LAN ports, check your connections. Then turn the Router off, wait for a few
seconds then turn it back on. If that does not work, log in to the web configurator
again and check you have typed all information correctly. See the User's Guide for
more suggestions.
Figure 14 Congratulations
You can also click GO to open the Easy Mode Web Configurator of your Router.
You have successfully set up your Router to operate on your network and access the Internet. You
are now ready to connect wirelessly to your Router and access the Internet.
NBG6503 User's Guide
DESCRIPTION
Select a Security level from the drop-down list box.
Choose WPA-PSK or WPA2-PSK security to configure a Pre-Shared Key. Choose this
option only if your wireless clients support WPA-PSK or WPA2-PSK respectively.
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless
connection by configuring WPA in the wireless LAN screens.
Retype the password to confirm.
Click this to close the wizard screen without saving.
Click this to return to the previous screen.
Click this to continue.
Chapter 2 Connection Wizard
29