What You Should Know; Wireless Security Overview; Mac Address Filter - ZyXEL Communications NBG6503 User Manual

Chapter 10 Wireless LAN
• Use the Advanced screen
as intra-BSS networking and set the RTS/CTS Threshold.
• Use the QoS screen
VoIP, chat, and so on.
• Use the WPS screen
security, without having to configure security settings manually.
• Use the WPS Station screen
• Use the Scheduling screen
turned on and off.
• Use the WDS screen
your Router.

10.3 What You Should Know

Every wireless network must follow these basic guidelines.
• Every wireless client in the same wireless network must use the same SSID.
The SSID is the name of the wireless network. It stands for Service Set IDentity.
• If two wireless networks overlap, they should use different channels.
Like radio stations or television channels, each wireless network uses a specific channel, or
frequency, to send and receive information.
• Every wireless client in the same wireless network must use security compatible with the AP.
Security stops unauthorized devices from using the wireless network. It can also protect the
information that is sent in the wireless network.

10.3.1 Wireless Security Overview

The following sections introduce different types of wireless security you can set up in the wireless
network.
10.3.1.1 SSID
Normally, the AP acts like a beacon and regularly broadcasts the SSID in the area. You can hide the
SSID instead, in which case the AP does not broadcast the SSID. In addition, you should change
the default SSID to something that is difficult to guess.
This type of security is fairly weak, however, because there are ways for unauthorized devices to
get the SSID. In addition, unauthorized devices can still see the information that is sent in the
wireless network.

10.3.1.2 MAC Address Filter

Every wireless client has a unique identification number, called a MAC address.
usually written using twelve hexadecimal characters
1. Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds
of wireless devices might not have MAC addresses.
2. Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F.
84
(Section 10.6 on page
(Section 10.7 on page 93) to set priority levels to services, such as e-mail,
(Section 10.8 on page 94) to quickly set up a wireless network with strong
(Section 10.9 on page
(Section 10.10 on page
(Section 10.11 on page
91) to allow wireless advanced features, such
95) to add a wireless station using WPS.
96) to set the times your wireless LAN is
97) to configure Wireless Distribution System on
2
; for example, 00A0C5000002 or
1
A MAC address is
NBG6503 User's Guide