Scheduling Screen - ZyXEL Communications NBG6503 User Manual

Chapter 10 Wireless LAN
The following table describes the labels in this screen.
Table 39 Network > Wireless LAN > WPS Station
LABEL
Push Button
Or input
station's PIN
number

10.10 Scheduling Screen

Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is
disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at
certain times. To open this screen, click Network > Wireless LAN 2.4G or Wireless LAN 5G >
Scheduling tab.
Figure 68 Network > Wireless LAN 2.4G/5G > Scheduling
The following table describes the labels in this screen.
Table 40 Network > Wireless LAN 2.4G/5G > Scheduling
LABEL
Wireless LAN Scheduling
Enable Wireless
LAN Scheduling
Scheduling
96
DESCRIPTION
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations's wireless settings. See
Click this to start WPS-aware wireless station scanning and the wireless security information
synchronization.
Use this button when you use the PIN Configuration method to configure wireless station's
wireless settings. See Section 9.3.2 on page
Type the same PIN number generated in the wireless station's utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
DESCRIPTION
Select this to enable Wireless LAN scheduling.
Section 9.3.1 on page 74.
75.
NBG6503 User's Guide