Bandwidth Management; Chapter 19 Bandwidth Management; Overview; What You Can Do - ZyXEL Communications NBG6503 User Manual

19.1 Overview

This chapter contains information about configuring bandwidth management and editing rules.
ZyXEL's Bandwidth Management allows you to specify bandwidth management rules based on an
application.
In the figure below, uplink traffic goes from the LAN device (A) to the WAN device (B). Bandwidth
management is applied before sending the packets out to the WAN. Downlink traffic comes back
from the WAN device (B) to the LAN device (A). Bandwidth management is applied before sending
the traffic out to LAN.
Figure 94 Bandwidth Management Example
A
You can allocate specific amounts of bandwidth capacity (bandwidth budgets) to individual
applications (like VoIP, Web, FTP, and E-mail for example).

19.2 What You Can Do

• Use the General screen
assign bandwidth values.
• Use the Advanced screen
for the pre-defined services and applications.
• Use the Monitor screen
that applications running in the network are using.
NBG6503 User's Guide

Bandwidth Management

-> VOIP
-> FTP
-> HTTP
-> Chat, Email
(Section 19.4 on page
(Section 19.5 on page
(Section 19.6 on page
C
HAPTER
B
138) to enable bandwidth management and
138) to configure bandwidth managements rule
143) to view the amount of network bandwidth
1 9
137