Wps Screen - ZyXEL Communications LTE4506-M606 User Manual

Table 18 Wi-Fi > MAC Filter (continued)
LABEL
Apply
Reset

5.5 WPS Screen

Use this screen to configure Wi-Fi Protected Setup (WPS) on your LTE4506.
WPS allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Set up each WPS connection between two devices. Both devices must
support WPS. See
Note: To use the WPS feature, make sure you have wireless enabled in the Wi-Fi > Wi-Fi
Settings screen.
Note: If you want to use the WPS feature set the security type to WPA or None.
Click Wi-Fi > WPS. The following screen displays.
Figure 24 Wi-Fi > WPS
The following table describes the labels in this screen.
Table 19 Wi-Fi > WPS
LABEL
Select WPS
Interface
Chapter 5 Wi-Fi
DESCRIPTION
Click Apply to save your changes back to the LTE4506.
Click Reset to reload the previous configuration for this screen.
Section 5.6.5.3 on page 50
DESCRIPTION
Select SSID 1 (or SSID 2) to configure WPS.
LTE4506 User's Guide
for more information about WPS.
42