ZyXEL Communications NBG6503 User Manual page 63

Table 27 Navigation Panel: Router Mode (continued)
LINK
Bandwidth
Management
Remote
Management
UPnP
MAINTENANCE
General
Password
Time
Firmware
Upgrade
Backup/
Restore
Restart
Sys OP Mode
NBG6503 User's Guide
TAB FUNCTION
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
Monitor Use this screen to view the amount of network bandwidth that applications
running in the network are using.
WWW Use this screen to be able to access the Router from the LAN, WAN or both.
General Use this screen to enable UPnP on the Router.
Use this screen to view and change administrative settings such as system
and domain names.
Password Use this screen to change the password of your Router.
Setup
Time Setting Use this screen to change your Router's time and date.
Use this screen to upload firmware to your Router.
Use this screen to backup and restore the configuration or reset the factory
defaults to your Router.
This screen allows you to reboot the Router without turning the power off.
This screen allows you to select whether your device acts as a Router or a
Access Point.
Chapter 7 Router Mode
63