Router Mode; Chapter 7 Router Mode; Overview; What You Can Do - ZyXEL Communications NBG6503 User Manual

7.1 Overview

The Router is set to router mode by default. Routers are used to connect the local network to
another network (for example, the Internet). In the figure below, the Router connects the local
network (LAN1 ~ LAN4) to the Internet.
Figure 40 Router Network
Note: The Status screen is shown after changing to the Expert mode of the Web
Configurator. It varies depending on the device mode of your Router.

7.2 What You Can Do

Use the Status screen
NBG6503 User's Guide
Router
(Section 7.3 on page
C
H A PT ER

Router Mode

Modem
58) to view read-only information about your Router.
7
57