Table 38 Network > Wireless LAN 2.4G/5G > WPS (continued)
LABEL
Release
Configuration
802.11 Mode
SSID
Security
Apply
Cancel
10.9 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS Station tab.
Note: Note: After you click Push Button on this screen, you have to press a similar
button in the wireless station utility within 2 minutes. To add the second wireless
station, you have to press these buttons on both device and the wireless station
again after the first 2 minutes.
Figure 67 Network > Wireless LAN 2.4G/5G > WPS Station
NBG6503 User's Guide
DESCRIPTION
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the Router.
This is the 802.11 mode used. Only compliant WLAN devices can associate with the
Router.
This is the name of the wireless network.
This is the type of wireless security employed by the network.
Click Apply to save your changes back to the Router.
Click Cancel to reload the previous configuration for this screen.
Chapter 10 Wireless LAN
95