Table of Contents
Advertisement
Chapter 4: Operating the Autoloader
The Operator's Panel
The Operator's Panel consists of:
Status LEDs
LCD
Keypad
Status LEDs
The LEDs are updated during power up and reset sequences. When you turn
on the autoloader or do a software reset, the autoloader turns on all LEDs as
soon as the power-on self-test (POST) allows.
When mechanical initialization starts, all LEDs turn off and the
READY/ACTIVITY LED flashes at rate of approximately one second per cycle.
When the mechanical initialization is complete, the READY/ACTIVITY LED
stops flashing.
If a loader failure occurs, the READY/ACTIVITY LED turns off and the error LED
turns on. The Operator's Panel also displays an appropriate error code to help
identify the failure.
30
Clean Drive LED
Ready/activity LED
Cancel
Media attention LED
- -
+ +
X X X X
Previous
Enter
Next
www.gateway.com
Error LED
LCD
Advertisement
Table of Contents
