Table of Contents
Advertisement
Chapter 2: Quick Start
Installing the data cartridges
Before you use the autoloader, you must install the data cartridges. For
more information on data cartridges, see "Data cartridges" on page 27.
Warning
To install the data cartridges:
1
Press any button on the Operator's Panel to change to interaction mode.
2
Select the
3
Select
4
Enter the number of the cartridge slot, then press E
5
Insert the cartridge in the cartridge access port. The cartridge is now placed
in the selected slot.
6
Repeat Steps 4 and 5 until all cartridges have been installed.
14
The tape drive only operates with LTO-1 Ultrium tape data
cartridges. The cartridges are available in 100/200 GB
size. Attempting to use other types of cartridges may
damage the tape drive.
menu, then press E
Commands
, then press E
Import
www.gateway.com
.
NTER
.
NTER
.
NTER
Advertisement
Table of Contents
