Table of Contents
Advertisement
Chapter 1: Introduction
Features
A carousel that positions the specified cartridge slot in front of the tape
drive. A robotic cartridge loader moves the cartridges between the cartridge
slots and the tape drive.
Storage for as many as eight data cartridges. Cartridges are stored in
cartridge slots mounted on the carousel. One of these cartridge slots can
contain a cleaning cartridge.
A cartridge access door for importing or exporting a single cartridge from
the autoloader.
A LCD that lets you monitor autoloader operations, select configuration
options, and control the cartridge loader and carousel from the front panel.
Independent SCSI controllers for the autoloader and tape drive. Each
controller supports independent sets of SCSI messages and commands. The
autoloader and the tape drive use a wide, low-voltage differential (LVD)
SCSI interface.
Compatibility with single-ended SCSI cables.
Physical Characteristics and Features
Drive technology
Total drives
Maximum storage cartridges
cartridge access door
LCD size and type
LCD user interface
Maximum capacity (compressed capacity assumes
a theoretical maximum 2:1 compression ratio)
Maximum sustained data transfer rate MB/sec
Maximum SCSI bus connections
SCSI connector type
2
LTO Ultrium 1
1
8
1
Two-line with 16 character per line,
ASCII
Four-button keypad
1.6 TB/800 GB (compressed/native)
32/16 (compressed/native)
1
68-pin high-density connector (HDCI)
www.gateway.com
Advertisement
Table of Contents
