Table of Contents
Advertisement
READY/ACTIVITY (Green LED) — Lights any time the autoloader is turned
on and able to function. It flashes whenever there is autoloader or drive
activity.
CLEAN DRIVE (Amber LED) — Lights when the drive needs to be cleaned.
The LED turns off after the drive is cleaned successfully.
MEDIA ATTENTION (Amber LED) — Lights when a cartridge is bad,
marginal, or invalid. The LED turns off when all invalid cartridges are
removed from the autoloader.
ERROR (Red LED) — Lights when there is an unrecoverable autoloader or
drive failure. A message appears at the same time on the screen. The LED
turns off when the error state is resolved. For a list of error codes, see "Error
codes" on page 43.
LCD (liquid crystal display)
The LCD consists of two lines, with 16 characters per line. The LCD displays
actions, status information, menu items, and error messages based on the
operation mode.
Keypad
You use the keypad buttons to navigate the various menu options that are
available. For more information, see "Menu options" on page 32.
Important
CANCEL button [X] — Cancels an action and returns to the last menu item.
PREVIOUS button [-] — Navigates through menu items.
NEXT button [+] — Navigates through menu items.
ENTER button — Goes to a sub-menu or forces a robotic action.
The keypad buttons are only available for use in interaction
mode. For more information on operating modes, see
"Operating modes" on page 34.
www.gateway.com
The Operator's Panel
31
Advertisement
Table of Contents
