Loading The Control Panel; Viewing The Control Panel - Gateway 386/33 User Manual

11-10 Gateway 2000 386/33 Computer System User's Guide
Loading the control panel
When you set up the mouse software, the Msetup pro-
gram asks if you wantto install the control panel so that
it loads automatically whenever you start your com-
puter. If you answer "Yes," Msetup modifies your
AUTOEXEC.BAT file accordingly.
If youchose not to have the control panel load automati-
cally, switch to the drive or directory that contains the
mouse program files and type:
cpanel
and press Enter at the system prompt to load the control
panel.
If you want to remove the control panel from memory,
switch to the drive or directory that contains the mouse
program files and type:
cpanel off
and press Enter at the system prompt.
Viewing the control panel
Wherever you are using the mouse with the control
panel loaded, you can view the control panel by press-
ing <Ctrl> +<Alt> and either mouse button. (See Ap-
pendix A, "Mouse Command-Line Switches," for infor-
mation on how you can change the key/mouse button
combinations used to display the control panel.)
Changing the sensitivity level
The position of the marker and the number below the
sensitivity bar indicate the current sensitivity level. The
sensitivity level can vary from 5 to 100 in increments of
5. The default is 50.