Pm Messages - Cisco Catalyst 4500 Series System Message Manual

PM Messages

PKTPROCESSING-5
Error Message C4K_PKTPROCESSING-5-NOTAPPLYINGACL:Not applying [input/output] Acl
for packet [packet-info]
PKTPROCESSING-7
Error Message C4K_PKTPROCESSING-7-ADJLOOKUPFAILED:Draining the backed up packets in
CPU queue when we cleaned up FIB adjacencies. Last drained packet's source address
[ip-addr]
PM Messages
This section contains the Port Manager (PM) messages.
PM-2
Error Message PM-2-LOW_SP_MEM: Switch process available memory is less than [dec]
bytes
Catalyst 4500 Series Switch Cisco IOS System Message Guide
2-78
The software is unable to determine the correct ACL entry that is indicated by the
Explanation
hardware. The hardware-provided index of the ACL content-addressable memory (CAM) indicates
that the software needs to take the actions for the entry at that index. If the packet was queued in the
hardware before the software could process it, the index is out of date.
This is an informational message only. No action is required.
Recommended Action
and destination address
This event can occur when the software processes the routed packets and the router port
Explanation
is shut down. The software can automatically repair adjacencies, but there was at least one packet
in the queue that was lost.
This is an informational message only. No action is required.
Recommended Action
Explanation The switch has insufficient memory for processing. Too many Layer 2 VLANs might
have been configured in the system.
Remove Layer 2 VLANs or other features from the system to reduce memory
Recommended Action
usage.
Chapter 2
[ip-addr]
Messages and Recovery Procedures
OL-13091-01