Flash Messages; Hw Messages - Cisco Catalyst 4500 Series System Message Manual

FLASH Messages

Error Message EC-5-UNSUITABLE:[char] will not join any port-channel
FLASH Messages
This section contains the Flash memory (C4K_FLASH) messages.
Error Message C4K_FLASH-4-COMPACTFLASHNOTFOUND: Cannot find compact flash
Error Message C4K_FLASH-4-COMPACTFLASHNOTREADY: Compact flash is not ready

HW Messages

This section contains the hardware (HW) messages.
Error Message C4K_HW-3-S2WERROR:[char] [char] [dec] Error: [object-info] Device
Addr: [dec] Mem Addr: [object-info] Value: [dec]
Error Message C4K_HW-3-X2IDENTIFICATIONFAILURE:Error while trying to identify serdes
type for [char] ( [dec]
Catalyst 4500 Series Switch Cisco IOS System Message Guide
2-36
The configurations for PortFast, VMPS, and Dest-SPAN are incompatible with
Explanation
EtherChannel.
Unconfigure the three features so that the port can form a bundle.
Recommended Action
You may see this message if the compact flash is not inserted properly or if it is removed
Explanation
while the switch is trying to access the flash.
Reinsert the compact flash and retry the operation.
Recommended Action
You may see this message if the compact flash is not inserted properly or if it is removed
Explanation
while the switch is trying to access the flash.
Reinsert the compact flash and retry the operation.
Recommended Action
An unexpected error occurred when the switch accessed the hardware device specified
Explanation
in the message.
Contact your technical support representative.
Recommended Action
There was an error when trying to identify the X2 module type.
Explanation
Recommended Action Contact your technical support representative. You will probably need to
replace the supervisor engine.
) X2 module
Chapter 2 Messages and Recovery Procedures
OL-13091-01